92% alumina liner brick (hardness>8,self abrasion rate<0.01%)

1) Al2O3>92% 2) Hardness>9 3) Wear-resisting 4) Abrasion rate<0.01% 5) Stable quality

1. About Alumina Lining Brick

Name: Alumina lining brickOther names: High alumina lining brick, alumina linerApplication: Suitable for both wet and dry grinding of alumina, zirconia silicate, feldspar, quartz, kaolin clay, glaze inks and ceramics material in ball mill. It can be used in ceramic industry, glass industry and chemical industry. Also, it is a good grinding media to product silica micropowder.Chemical composition and physical properties:

Al2O3	>=92%
Fe2O3	<=0.01%
Compressive strength	>=2250
Hardness mohs	>=9
Volumn density	>=3.60g/cm3
Water absorptivity	<0.01%
Equivalent abrasion	<=0.01%
Color of product	White

Size: 

		Length(mm)	150	150	150	150	150
		Width(mm)	50	50	50	50	50
		Height(mm)	40	50	60	70	100

		Length(mm)		150	150	150	150	150
		Width(mm)	W1	45	45	45	45	45
			W2	50	50	50	50	50
		Height(mm)		40	50	60	70	100

2. Correct installation of alumina lining brick

Before installation, all the partial remaining bricks, cement and dust on the inner surface should be cleared. Uneven part should be patched, and the smooth surface should be made coarse to increase the cohesion with cement.

The installation gap should be within 1mm.

The installation order begins from the end face, two end faces are all used by rectangle bricks or half rectangle bricks,  after this, then for cylinder installation, which is used by column bricks and ladder type bricks in pairs. As to the cylinder installation combination, as a rule first column bricks are installed, then ladder type bricks, by turns in this way, until the last rank, to ensure the bottom of bricks cling to the inner wall of the cylinder closely. If the column bricks can not built in, then the thin bricks are filled in and white cement is used to envelop. When finished, the surface must be cleaned.

3. Packing details

4. Why buy from Gaoteng

Dalian Gaoteng was set up in 2000.Passed ISO9000, the certificate NO. is USA10Q22233R0S.Professional supplier of ceramic grinding media and related products.Exporting to worldwide countries: Europe, Southeast Asia, Japan, Korea, Middle East, North Africa, etc.Main clients: TOTO LIMITED(China and Indonesia)                    ENDEKA CERAMICS(Spain, China, India and Malaysia)                    AL-JAWDAH CERAMICS CO(Saudi Arabia)                    TOKAI KOGYO CO.,LTD(Japan)                    "ROSSINTEZ" LTD(Russia)Owing our own international logistics company, we can supply professional logistics service.The member of WIFFA, the certificate NO. is WIFFA W0002492.

5. Pictures on China International Ceramics Exhibition with our customers 

  

6. You may also interested in

7. Contact us

We welcome your phone calls, emails and visits.

We speak good English, and we offer our customers best and professional service.

             

92% alumina liner brick (hardness>8,self abrasion rate<0.01%)